About Me

Unordered List

Definition List

Friday, 10 May 2019

Common Electrical House Appliances Problem And How To Fix It

Common Electrical House Wiring Mistakes People Do

A house is incomplete without beautiful lights, fans and electrical gadgets that suffice the daily needs of a family. As important as the family bond and love is, so are the basic electrical appliances, to keep the home working in peace. It is important to have these electrical appliances and it is more important to fix them right. The beauty of homes should remain intact while wiring these essential appliances however many a times it so happens that, to keep the beauty intact people commit some common electrical house wiring mistakes, that should thoroughly be avoided. Here is a list of all those common mistakes that people unknowingly do and face a problem that can be as big as life threatening.

Protect wiring from nails and screws: While working on the interiors of the home it is important to keep at least a 1 1/4th inch of clearance gap between the wooden frame and the electrical cables. It is important for a house to look beautiful, but it is more important for the house to be safe. Thus, it is advisable to leave this gap that generally people tend to forget while working on the wiring. This gap helps the wire from puncturing through nails or screws that are externally pierced into the walls later.

Don't Crowd A Hole With Many Wires: People often dig a small hole into the wooden plank or wall and try to insert as many wires as possible to not harm the beauty of the house. This is a terribly wrong thing to do, as stuffing too many wires in one hole erodes their protection coating and can cause friction burns on the insulation jacket while pulling out the wires. Cables and house wires are designed in a way to suit the conditions on a household level. Hence, it is important to fix problems faced by them instantly for the safety of the house and people living in there.

Never Mix Line Voltage And Low Voltage Wires: People are often not aware of the various wires that are used for various appliances. They mix wires and fix them in the same box to instantly get done with the work. The line and low voltage wires cause interference between electronic and telephonic appliances and may catch fire. Mixing the two wires can be harmful to a great degree and hence, should be taken care of immediately.

These are the common mistakes people commit, however every problem has a solution and having the knowledge of house wiring solution is the perfect way to stay safe and keep the house disaster free.

More Common Mistakes in Security Camera System Design

1. Buying cheap equipment

There is plenty of poorly made equipment on the CCTV market these days. We know this because we reject 90% of the manufacturer samples that come across our test bench. If you buy the cheapest equipment on the market you are more likely to have these kinds of problems:

Equipment that doesn't work out of the box cameras that work for a while then stop cheap brackets and connections that won't hold up outdoor cameras that leak infrared that is ineffective poor image quality missing features on your DVD DVR software that is buggy and incomplete

Some of the big box stores are now offering "complete" CCTV setups. However, these systems are usually not very good quality and they are not designed to your requirements. The other problem with these pre-packaged systems is that they often have proprietary connections so you cannot mix and match components from other manufacturers. Furthermore, if you have a problem or question about the product they are not likely to have the expertise to help you.

Solution: Buy from a reputable company that specializes in CCTV. Look for reviews and references that indicate that the products are good quality. The sales staff should know their product and be able to help you design a system that suits your application. Look for good support, warranty and return policy. Make sure that the cameras and DVRs all have BNC (Bayonet Neill-Concelman) type connections for the video.

2. Using one PTZ camera to cover too large an area

PTZ (pan / tilt / zoom) cameras are great because they allow you to remotely move the camera up-and-down and side-to-side and to adjust the focus (zoom) in and out. So theoretically you can cover a lot of area with one PTZ camera. However, unless the PTZ camera is being monitored by a human it will only be focused on one area at a time just like any other camera. We often get reports of incidents not being recorded because it happened outside the current view of the PTZ even though it was within the PTZs viewing range.

Solution: Unless you have a human actively monitoring and adjusting the PTZ do not use them to cover a wide area. Instead use multiple cameras to cover the area effectively. The good news is that you can usually purchase several non-PTZ cameras for the cost of one PTZ.

3. Not having enough bandwidth to view cameras remotely

In order to view your cameras remotely you must connect your DVR to a network and set it up to broadcast to the Internet. The trouble is that homeowners often do not have the internet upload speed to support real-time viewing remotely. Businesses don't have as much trouble with this because commercial Internet service is usually faster. Typical commercial Internet speeds are 12 mbps (megabit per second) download and 5 mbps upload. For residential sites, it's often closer to 3 mbps download and 0.5 mbps upload. That's 1/10 of the typical upload speed than you are used to seeing on commercial sites.

Solution: If you want to view your cameras remotely over the Internet or on your phone, make sure you arrange with your Internet Service Provider to get at least 1 Mbps upload speed.

4. Using an analog "wireless" camera system

The name "wireless camera system" is somewhat misleading because although you don't need wires to transmit the video you still need wires to power all of the components. So, wireless systems do not solve all of your cabling dilemmas. There are two types of wireless technologies: analog and digital. Because the government regulates which frequencies analog wireless devices can run on and how strong the signal can be, interference is a very common problem. Other wireless devices such as cell phones and microwave ovens can cause the video to be unsteady, distorted, and noisy. Analog wireless transmission also does not have any security encryption of the video data - so anyone with a receiver in range utilizing the same frequency can view and record your camera's video.

Solution: Use a hard-wired analog security camera system or a digital wireless camera system.

5. DVR does not allow adequate number of remote viewers

DVR software will often limit the number of users that can remotely view the camera system at one time. This can present a problem for schools, day care centers and other businesses that are marketing this capability as one of their clothets. In addition, bandwidth needs to be considered in these situations as well. The more people that you have connected remotely - the more bandwidth that will be used on your network.

Solution: If allowing multiple people to view the cameras remotely at one time is an important requirement, then you must double check for any limitations in the DVR software. One trick to address the bandwidth issue is to set up your router to disconnect any users that are connected to the DVRs IP address for more than a specified number of minutes. For example, if a person views the camera system remotely on their computer and then leaves the screen open, the router will automatically disconnect them after 15 minutes (or whatever time limit is appropriate).

Common Mistakes To Avoid While Installing The Electrical Panel

No doubt, the electrical panel is the need of every household, commercial as well as the industrial sectors because it ensures the supply of power to the circuits or sub-circuits, so, you can plug-in your electrical appliances to run them properly. It feeds the right voltage to your circuit to power up your home or office. However, because of the lack of knowledge, people use the device in an improper way, which leads to the number of problems such as device failure, short-circuit, fire catch etc. In an order to properly troubleshoot the electrical panel problem, you have to avoid some common mistakes while the installation of the device. Scroll down and get to know about those silly mistakes and simple ways to avoid them.

Incorrect Wiring: In an order to ensure the proper working of the electrical panel, it is important to install it correctly. Improper wiring, wrong combinations and poor installation only increase the risk of damage and cost you the fortune in the near future. Make sure to address professional team to do the installation, so you will never witness any such problem.

Under Or Over-Power: Another common mistake people make while working with the electrical panel is, they under or over power the unit, which increases the chance of short-circuit or power failure. You can easily avoid the problem by choosing the appropriate model and size as per your home, office or manufacturing industry power need. A right selection may ensure the safe working of the device for a longer time.

Use Of Improper Hardware:

If you are using any improper hardware such as screws, nuts, wires, plugs, bolts, etc. that does not match the requirement of electrical panel, so, it only creates trouble. Thus, you should understand which hardware is good for your device or which one is not.

Installation In The Moisture Area: Don't you know that water and electricity do not mix well? If yes, so, how can you even make such blunder? To ensure the safety of the electrical panel, it is important to install them at the place, which is away from the moisture, water or direct sunlight. This is the major reason most of the panels are installed in the dark rooms.

These are some of the common mistakes and their simple solutions. Wake up and don't repeat any of the above mistakes, or else, it will cost you more than you even think.